Plastic Injectors
See Also:  Wax Injectors            Back to  wpe1.jpg (1321 bytes) Casting Gateway

Benchtop & Floor Model Plastic Injectors-   

Plastic injectors are used to inject plastic into metal molds. They will produce patterns of incredibly fine detail with uniformity of size, shape and weight. Shrinkage is undetectable and every pattern is identical with the preceding and subsequent patterns. Metal molds can be made inexpensively with the Shor Lok-Blok mold frames.

Plastic patterns are almost impossible to break, distort or damage, even if stored for years. Their sharpness is so fine that a loupe is required to see all the detail. Delicate pieces that are absolutely impossible to do in wax are child’s play in plastic. When bent, plastic patterns will quickly return to their original shape. 

 

 Model 100-4, Manual Plastic Injector-
  • Easy to read and adjust digital temperature controller
  • Adjustable ram speed control
  • Aircraft spec. aluminum body
  • Easy to view material hopper
  • Stainless steel injection chamber and piston for corrosion resistance
  • All pneumatic devices are of the "no-lube" design, making the machine ideal for medical and other clean room applications
  • Working area protected by transparent safety-guard and safety red heat shield.
  • Right and left hand operation
  • Mold stop and ejector
  • Quick acting clamp for easy operation
  • 4" cylinder
  • 6300 psi
  • Hardened screw and bronze nut for long wear

Price: $5,995

Model 150-4 Hydro Pneumatic Plastic Injector-
  • Easy to read and adjust digital temperature controller
  • Lever operated power clamp
  • Adjustable mold stop with automatic ejector
  • Adjustable mold clamp for different thickness molds.
  • Ergonomic workstation design
  • Aircraft spec. aluminum body
  • Stainless steel injection chamber and piston for corrosion resistance
  • All pneumatic devices are of the "no-lube" design, making the machine ideal for medical and other clean room applications
  • Working area protected by transparent safety-guard and safety red heat shield.
  • Machine is transportable.  Does not require a permanent installation.

Price: $7,995

Model 200-4, Semi-Automatic Plastic Injector-
  • Easy to read and adjust digital temperature controller
  • Adjustable mold stop with automatic ejector
  • Adjustable mold clamp for different thickness molds
  • Aircraft spec aluminum body
  • Adjustable sequencing and injection cycle, 5-99 seconds
  • Built-in resetable production counter
  • Stainless steel injection chamber and piston for corrosion resistance.
  • Working area protected by transparent safety-guard and safety red heat shield.
  • Machine is transportable.  Does not require a permanent installation.

Price: $8,995

Model 300-4, 400-4 Workstation Plastic Injector-
  • Floor model "sit down" agronomical work station design
  • Foot air-operated hopper to free operator's hands for faster handling of molds.
  • Adjustable mold stop with automatic ejector.
  • Adjustable mold clamp for different thickness molds
  • Adjustable sequencing and injection cycle, 5-99 seconds
  • Adjustable clamping, injection and ejection sequencing on front panel
  • All pneumatic devices are of the "no-lube" design, making the machine ideal for medical and other clean room applications
  • Stainless steel injection chamber and piston for corrosion resistance.
  • Working area protected by transparent safety-guard and safety red heat shield.
  • Machine is transportable.  Does not require a permanent installation.
  • Model 400-4 is double capacity

Model 300-4   Price: $10,995          Model 400-4   Price $15,995

 

Overall Technical Specifications
Specification Manual 100-4 Pneumatic 150-4 Semi-Automatic 200-4 Workstation 300-4
Clamp Force (lbs) 4,000 lbs 4,000 lbs 4,000 lbs 4,000 lbs
Plastic Capacity 1/4 oz (6 gr) 1/4 oz (6 gr) 1/4 oz (6 gr) 1/4 oz (6 gr)
Injection Pressure @125psi 6333 psi 6333 psi 6333 psi 6333 psi
Voltage Required 120V 50/60 hz 120V 50/60 hz 120V 50/60 hz 120V 50/60 hz
Heat Capacity 400 watts 400 watts 400 watts 400 watts
Temperature Range 100°- 600° F 100°- 600° F 100°- 600° F 100°- 600° F
Mold Height 2½" 2½" 2½" 2½"
Sprue Center Line 7/8" 7/8" 7/8" 7/8"
Daylight between Mold Opening 2"-2-1/4" 2"-2-1/4" 2"-2-1/4" 2"-2-1/4"
Maximum Molding Area 3" square 3" square 3" square 3" square
Cycle Time . . 5-99 seconds 5-99 seconds
Ram Diameter 9/16" (14.28 mm) 9/16" (14.28 mm) 9/16" (14.28 mm) 9/16" (14.28 mm)
Nozzle Orifice 0.093" 0.093" 0.093" 0.093"
Hopper Capacity 7.85 oz (220G) 7.85 oz (220G) 7.85 oz (220G) 7.85 oz (220G)
Machine Dimensions 18" x 21" x 25" 28" x 21" x 27" 18" x 25" x 32" 28" x 21" x 55"
Machine Weight 70.4 lbs (32 kg) 82.5 lbs (37.5 kg) 90.2 lbs (41 kg) 157.3 lbs (71.5 kg)

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net