Swiss Crochet Files & Warding Files
All Files are double cut (cross cut) unless otherwise noted

Back to wpe7.jpg (1231 bytes) Files Gateway Page

Crochet Files- Useful in developing slots with rounded edges. Tapered in width and thickness, coming to a point. Cut top and bottom, double cut. Cut on both sides, single cut.

Cross Section Length Width Thickness Cut 00 Price Cut 0 Price Cut 2 Price
4" 5/16" 3/32" . . 31.047 $23.90 31.048 $25.75
6" 13/32" 9/64" 31.049 $26.65 31.050 $28.15 31.051 $30.40
8" 15/32" 11/64" 31.052 $36.70 31.053 $38.75 31.054 $41.95

 

Die Sinkers' Crochet Files- Overall length 5½". Length of cut 3½".
Cut 0 Price Cut 2 Price
31.422 $24.15 31.423 $25.99

 

Crochet Needle Files 

Length Cut 0 Price Cut 2 Price Cut 4 Price
10 cm. 31.474 $12.35 31.475 $12.35 31.476 $12.35
14 cm. 31.477 $10.15 31.478 $10.15 31.479 $10.15
16 cm. 31.480 $11.15 31.481 $11.15 31.482 $11.45

 

Warding Files- Useful in removal of burs.  Parallel in thickness and tapered in width. Double cut top and bottom. Single cut sides.

Cross Section Length Width Thickness Cut 00 Price Cut 0 Price Cut 2 Price Cut 4 Price
3" 23/64" 1/32" . . 31.387 $17.50 31.388 $18.99 . .
4" ½" 3/64" 31.389 $17.10 31.390 $18.10 31.391 $19.40 31.392 $22.65
6" 5/8" 5/64" 31.393 $20.20 31.394 $21.20 31.395 $23.95 31.396 $26.72
8" 7/8" 7/64" 31.397 $27.65 31.398 $29.35 31.399 $31.65 . .

 

Warding Files, Special Thickness
Cross Section Length 3" 4" 6" 6" 6" 6" 6"
Width 23/64" ½" 5/8" 5/8" 5/8" 5/8" 5/8"
Thickness .025" .032" .065" .049" .049" .042" .042"
Cut# 0 0 0 0 2 0 2
Stock# 31.401 31.402 31.403 31.404 31.405 31.406 31.407
Price $21.15 $21.90 $23.95 $22.90 $32.80 $22.90 $32.80

 

Die Sinkers' Warding Files- Overall length 5½". Length of cut 3½".
Cut 0 Price Cut 2 Price
31.442 $21.90 31.443 $21.90

 

American Pattern Warding- A popular file with locksmiths, the Warding file was designed for filing or repairing "wards" in licks and keys.  As the Warding file is thin, it is also suited for any application where the space is too narrow for other files to fit.  This file tapers toward the end.  Double cut on top and bottom but single cut on the edges.  Swiss made.

Cross Section Length Width Thickness Bastard Cut (00) Price per Dz. 2nd Cut (0) Price per Dz. Smooth Cut (2) Price per Dz.
4" 5/32" 3/64" 32.468S $88.99 32.473S $95.99 32.477S $102.99
6" 5/8" 5/64" 32.469S $95.99 32.474S $107.99 32.478S $18.99
8" 25/32" 3/32" 32.470S $118.99 32.475S $131.99 32.479S $145.99

 

Warding Needle Files 

Knurled Handles

.

Plastic Handles
Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Length Cut 0 Price Cut 2 Price Cut 4 Price
10 cm. 31.656 $8.99 31.657 $11.65 31.658 $11.65 . . 10 cm. 30.656 $13.10 30.657 $13.10 . .
14 cm. 31.659 $9.15 31.660 $9.65 31.661 $9.95 . . 14 cm. . . . . 30.661 $10.05
16 cm. 31.663 $9.80 31.664 $10.50 31.666 $10.95 31.667 $14.45 16 cm. 30.663 $11.85 30.664 11.85 30.666 $12.35
20 cm. 31.668 $13.25 31.669 $12.85 31.670 $14.70 . . . . . . . . .

 

Valtitan Warding Needle Files- For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known- Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces.  Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.

Length Cut 0 Price Cut 2 Price
16 cm 30.110V $17.05 30.111V $17.05

 

Economy Warding Needle Files- Well made, yet economical , Swiss needle files, made of chrome alloy steel.  Cut portion is 3" long.

Length Medium Price per Dz. Fine Price per Dz.
14 cm. 33.902 $47.40 33.903 $53.20

 

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net