Precision Anvils
Back to Bench Tools Gateway,       Silversmithing & Chasing Gateway   Anvils & Stake
Related Web Pages
:    Bracelet & Ring & Neck Mandrels,   wpe1.jpg (7637 bytes)  Bezel Blocks, Dap, Form, Punches & Cutters

Anvil Size Weight Stock# Price  
Steel Bench Blocks-

Supports work for flattening and when laying out designs. Case-hardened. Ground flat and smooth.

2½" x 2½" x ¾" 1 lb 12.317 $13.75
4"x4"x¾" 3 lb 12.319 $20.70

Bench Block Helper w/ Steel & Nylon Blocks -  This three piece set includes a thick vulcanized firm rubber base which absorbs shock, plus a solid steel block which is 15/16" (24mm) thick and 3" (75mm) in diameter. The third piece is a sturdy nylon block the same size that fits into the rubber base for lighter, more delicate work. This is a well made set, and allows one to hammer without creating excess noise and vibration at the bench. 

5" x 2¼" 2.5 lb DAP-500.30 $28.95
Reversible Double Horn Anvil

Machined from a solid block of tool steel.  Case hardened and highly polished.  Riveting hole in top.  Superbly manufactured. Made in Europe.

4½" x 15/8" H 1 lb 166.00 $24.95
Double Horn Anvils
For precision work, our miniature horn anvils are drop forged steel, which is then case hardened.  Traditional models which have remained popular for years. 
1¼" x5¼"  1¼ lb ANV-200.00
(European)
$26.95
1¼" x 4½" 1 lb

ANV-205.00
(Economy)

$19.85
Small Double Horn Anvil on Round Base
Round base model has one flat and one round horn on cast steel base.
 2¾" x 4" 1¾ lb ANV-220.00 $19.95
Large Double Horn Anvil on Round Base
A larger version of our excellent bench anvil, this model is about 3 times the weight. It has a highly polished horn and top surface with a 5
" diameter base for greater stability.
5¼" x7¾" 4¼ lb ANV-222.00 $24.95
Large Single Horn Anvils

Made of cast steel, larger anvils are excellent for a variety of uses because of their weight.  

They make great bench blocks for pounding on metal.  

Good for applications where lower cost is essential.

5¼" x2½" x 2¼" 1¾ lb ANV-550.00 $19.95
6½" x3¾" x 2¼" 3¾ lb ANV-555.00 $24.95
Slot Anvil- 
Used as a base for staking, riveting and drilling small parts. V-slot is handy for removing pinions and similar items. Case hardened and ground flat and smooth. Has 9 graduated holes, one size for stumps and 5 milled slots. 
1¾" x1¼" x½" 1 lb 12.315 $18.20
Hexagon Slot Anvil- 
Used as a base for staking, riveting and drilling small parts. Case-hardened and ground flat and smooth. Has 16 holes, graduated from 3/64" to ¼". 5 milled slots.   
1" x ¾" 1¼ lb ANV-170.00 $19.95
Brass Ring Stamping Block- A favorite for almost 50 years, this high quality block secures rings in a rounded cut-out which prevents flat spotting on the shank. Has graduated sizes and shapes on both sides.    1 lb BT-75 $49.99 wpe2.jpg (3165 bytes)

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net