Tap & Die
Back to Bench Tools Gateway                Back to: Watch & Clock Repair Gateway

 

Bergeon Tap & Die Set for Clock & Instrument Repair- Swiss made.  Covers a wide range of right hand screw thread sizes most commonly used in repair of clocks, meters, instruments and electronic units. Consists of 8 dies, 3 each of 8 screw taps in sizes : 1, 1.2, 1.4, 1.7, 2.0, 2.3, 2.6 and 3.0 mm, die stock, screwed die stock and adjustable tap wrench.

Tap & Die Set

Stock  #30322

 Price:  $954.65

Tap Wrench Only

 Stock #30419 Price:  $80.30

 

Bergeon Tap & Die Set for Watch Repair- Small set of most commonly used right handed taps and dies. Set consists of 8 dies in sizes: .40, .50, .60, .70, .80, .90, 1.00 and 1.20 mm, each of 8 taps in separate tubes and ring die stock. Packaged in a wooden box.  Taps available separately, but not dies.

2776 $658.95
Size in MM Individual Taps (Pkg. of 3, except the A1, A2 & A3) Price
.30 1967/A1  (pack of 1 only) $7.10
.35 1967/A2  (pack of 1 only) $7.10
.40 1967/A3  (pack of 1 only) $7.10
.45 1967/A4  (pack of 1 only) $7.10
.50 1967/B1 $19.30
.55 1967/B2 $19.30
.60 1967/B3 $19.30
.65 1967/B4 $19.30
.70 1967/B5 $19.30
.75 1967/B6 $19.30
.80 1967/B7 $19.30
.85 1967/B8 $19.30
.90 1967/B9 $19.30
.95 1967/B10 $19.30
1.00 1967/C1 $19.30
1.05 1967/C2 $19.30
1.10 1967/C3 $19.30
1.20 1967/C4 $19.30
1.30 1967/C5 $19.30
1.40 1967/D1 $19.30
1.50 1967/D2 $19.30
1.70 1967/D4 $19.30
2.00 1967/E $19.30

 

Bergeon Tap & Die Set for Jewelry Repair- Swiss made.  Specially designed for working on precious metals. 

Tap Wrench only Stock#2274A Price:   $30.20
Size in MM Individual Dies Price Individual Taps Price
.60 2274/E1 $32.85 2274/D1 $6.30
.80 2274/E2 $45.50 2274/D2 $6.30
1.00 2274/E3 $45.10 2274/D3 $6.30
1.20 2274/E4 $32.55 2274/D4 $6.30
1.40 2274/E5 $32.55 2274/D5 $6.30
1.60 2274/E6 $45.50 2274/D6 $6.30
1.80 2274/E7 $45.50 2274/D7 $6.30
. . . 2274/D8 $7.50

 

Bergeon Tap & Die Set for Mechanics- Swiss made.   For the mechanic doing light machine shop work where millimeter thread sizes are required.   Range from 1 to 6 mm.  Consists of 14 dies, 3 each of 14 taps in sizes: 1.00, 1.20, 1.40, 1.70, 2.00, 2.30, 3.50, 4.00, 4.50, 5.50 and 6.00 mm, 3 tap holders and 3 die stocks.  Packaged in wooden case.

       Stock #30418      Price:   $1,429
Size in MM Individual Dies  Price Individual Taps (Pkg. of 3) Price
1.00 30062A/1.00 $43.85 ... .
1.20 30062A/1.20 $43.85 30063A/1.20 $29.10
1.40 30062A/1.40 $43.85 30063A/1.40 $29.10
1.70 30062A/1.70 $43.85 30063A/1.70 $36.40
2.00 30062A/2.00 $43.85 30063A/2.00 $36.40
2.30 30062A/2.30 $43.85 30063A/2.30 $29.10
2.60 30062A/2.60 $43.85 30063A/2.60 $29.10
3.00 30062A/3.00 $43.85 30063A/3.00 $29.10
3.50 30062A/3.50 $58.85 30063A/3.50 $55.95
4.00 30062A/4.00 $43.65 30063A/4.00 $33.40
4.50 30062A/4.50 $58.75 30063A/4.50 $51.75
6.00 30062A/6.00 $47.50 30063A/6.00 $37.75

 

Precision Metric Tap & Die Set- German made.   Consists of 8 dies covering the range from 1.00 mm to 3.00 mm in sizes listed below.  Also  included is 1 die holder,  1 adjustable tap holder, eight sets of 3 right taps (total 24) and a fitted hardwood case.  This set is for clocks, meters and similar sized instruments.

       Stock #CM56150      Price:   $571

Individual Dies & Taps-  Dies priced individually-  Price $34.00.  Taps priced and sold in packages of 3- Price $34.00 per pkg. of 3 
Size (mm) Die Stock# Tap Stock #   Size (mm) Die Stock# Tap Stock #
1.00 CM56151 CM56161 2.00 CM56155 CM56165
1.20 CM56152 CM56162 2.30 CM56156 CM56166
1.40 CM56153 CM56163 2.60 CM56157 CM56167
1.70 CM56154 CM56164 . . .

 

Bergeon Screw Tap Assortment- Swiss made.  Finest quality, right handed screw taps covering wide range of threaded sizes. Consists of 45 pieces, 3 each of sizes .30 to 1.30/100 mm. Comes in wooden case with measurement chart.
30221 $350

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net