Clock Hole Closing Punches-
For reducing hole size in brass plates in clocks, meter, etc. Spring center
guides punches so that it will be concentric. Punch is tapped with small
hammer. Set contains all seven punches in wood case.
Size
Stock#
Price
Size
Stock#
Price
Size
Stock#
Price
Size 1/0
PN 24720
$21.85
3
PN 24723
$19.95
6
PN 24726
$17.50
1
PN 24721
$8.70
4
PN 24724
$17.50
Set
PN 24719
$38.20
2
PN 24722
$10.75
5
PN 24725
$17.50
Set of Pin Punches-
Made of hardened steel with knurled handles. Contains 5 drive pin punches
with diameters of 1-5 mm and a very fine point center punch with a diameter
of 5 mm. Comes in polished wood box.
Set of Double Ended
Cutters- Swiss set of 6 for enlarging holes,
beveling, cleaning screw heads and clearing dial feet. Comes in polished
wood case.
30414
$276.00
Conical Double End
Cutters, 3-4.5 mm
30414A/1
$56.40
Beveling Double End
Cutters, 3-4 mm
30414A/2
$56.40
Clearing Screw Ends
Double End Cutters, 2.2-4 mm
30414A/3
$56.40
Hollow Center Burr
Removers for Cutting Edges Double End Cutters, 3-4 mm
30414A/4
$56.40
Beveling Double End
Cutter, 1-2 mm
30414A/5
$56.40
Clearing Screw Ends
Double End Cutters, .09-1.3 mm
30414A/6
$56.40
Set of Chronograph
Screw Shoulder Cutters- Contains 17 sizes of
undercutters for chronograph screw shoulders or other small screws. Set in
heavy metal base that will no tip or slide while cutting. Swiss made
30615
$1,699.00
Bergeon Cutters
for Cleaning Dial Feet- A very useful tool for clearing
solder from base of dial foot. Usually the dial will not fit flat onto the
movement plate with accumulated solder at the base of the foot. This tool
easily and cleanly clears it away.
30511
$138.35
Balance Screw Cutter-
Cuts notch in tip of balance screw without removing it from the balance
wheel. Removes weight when truing or poising. Retractable collar keeps
cutter centered. Set of three different sizes.
PN 59298
$49.95
Bergeon Pin Chamfers
or Counterbores Set- For channeling or
recessing square shouldered screws. Pilot pin acts as a guide for cutters.
Set contains 12 pin chafers with interchangeable pivots permitting 80
different combinations. Complete with holder in wood case. Swiss made.
30007-MD
$1, 995.00
Replacement
Countersink- 1.60 mm
30007A/1.60
$32.95
Replacement
Countersink- 2.50 mm
30007A/2.50
$32.95
Replacement Pivot-
.90 mm
30007A/.90
$5.55
Replacement
Countersink- 2.20 mm
30007A/2.20
$32.95
Replacement
Countersink- 4.50 mm
30007A/4.50
$32.95
Bergeon Double End
Countersink Set- Swiss made set contains 6
double-ended tools, ranging from 1.8 mm to 5.0 mm. Used for countersinking
and burnishing holes. Replacement tools are available by special order.
Back
to 
Watch
& Clock Repair Gateway
