 |
 |
|
 |
||
 |
||
|
|
 |
|
|
|
|
|
||
|
||
|
|
|
|
 |
 |
|
|
|
 |
Soldering Boards, Blocks, Etc.
Back to 
Soldering
Gateway
| Description | Stock# | Price | ||
 |
Rotating Non-Asbestos Table- Grooved work surface disk is 4½" in diameter. Rotates on ball bearings, lazy Susan style, providing 360 degree access. Perfect for soldering | 54.116 | $20.85 | |
| Replacement Disk | 54.117 | $6.20 | ||
 |
Hi-Temp Soldering Board for Platinum  -
This non-asbestos board measures 4¼" x 4¼" x ½" and takes heat up
to 3,200°F. Especially handy for working with platinum. |
SOL-410.05 | $21.45 | |
 |
Rotating Annealing Pan- Allows positioning of work while annealing or soldering on a heat reflecting material, such as pumice. Rotates on ball bearings, providing 360 degree access. Pan is available in 2 sizes and each comes with 2½ lbs of pumice |
12" |
54.120 | $62.50 |
|
7" |
SOL-520.00 |
$29.95 |
||
| Replacement Pumice, 2½ lbs | 54.122 | $12.60 | ||
 |
Ceramic Ring Stand- Mounted on base with swivel to provide the exact position or angle desired. 6" ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement. | 54.131 | $25.20 | |
| Carbon Ring Stand- Holds rings, leaving both hands free. Mounted in fixed position on asbestos free base. Length of rod is 6". | 54.128 | $26.45 | ||
| Replacement Ceramic Rod- For both ceramic and carbon ring stands. | 54.132 | $10.85 | ||
| Replacement Carbon Rod- For both ceramic and carbon ring stands. | 54.130 | $10.10 | ||
 |
Round Honey Comb Ceramic Soldering Blocks- Blocks have 3,500 holes, approximately 1/16" in diameter. Withstands temperatures up to 6,000° F with little or no thermal expansion. Provides a permanent flat surface with very low loss of heat. | 4½" | 54.0965 | $13.00 |
| Rectangular Comb Ceramic Soldering Block- ½" thick, lightweight block reflect heat and perforations hold pins to keep work in place while heating. Withstands heat up to 2,000°F. | 3¾" x 5½" | 54.215 | $9.20 | |
| 5½" x 7¾" | 54.216 | $13.35 | ||
 |
Cordiorite Soldering Board with Grooves- Non-asbestos. Flat one side, with grooves on the other for holding shanks, chains, etc. Withstands temperatures u to 2,000° F. 7½" x7¼" x ½". | 54.219 | $24.00 | |
 |
Cordiorite Soldering Board with Rubber Feet, 6" x 6" x ½" | 54.218 | $14.00 | |
| Cordiorite Soldering Board with Rubber Feet, 6" x 12" x ½" | 54.220 | $13.60 | ||
 |
Magnesia Soldering Block- Soft, fireproof material into which work or pins can be easily pressed. 6" x 3" x 1½". 2,000° F | 54.186 | $4.50 | |
 |
Asbestos Free Pad, 6" x 6" x ½"- Ideal for bench protection. Steadying pins can be inserted. withstands temperatures up to 3,000°F. | 54.210 | $23.95 | |
| Asbestos Free Pad, 6" x 12" x ½"- Ideal for bench protection. Steadying pins can be inserted. withstands temperatures up to 3,000°F. | 54.211 | $32.70 | ||
| Asbestos Free Pad, 12" x 12" x ½"- Ideal for bench protection. Steadying pins can be inserted. withstands temperatures up to 3,000°F. | 54.212 | $45.30 | ||
 |
Charcoal Block, 3½" x 2¼" x 1½" | 54.152 | $7.65 | |
| Charcoal Block, 3½" x 2¼" x 1½" (Package of 6) | 54.151 | $42.50 | ||
| Charcoal Block, 4¾" x 3" x 1½" | 54.162 | $11.80 | ||
| Charcoal Block, 4¾" x 3" x 1½" (Package of 6) | 54.161 | $66.15 | ||
| Charcoal Block, 3½" x 4" x 1½" | 54.172 | $23.95 | ||
| Charcoal Block, 3½" x 4" x 1½" (Package of 6) | 54.171 | $128.75 | ||
| Charcoal Block, 5½" x 2¾" x 13/16" | 54.182 | $14.15 | ||
| Charcoal Block, 5½" x 2¾" x 13/16" (Package of 6) | 54.181 | $70.85 | ||
 |
Hardwood Charcoal Soldering Blocks- Lasts 3-5 times longer than ordinary blocks!!! This is the world's best charcoal, made of hardwood with great life and durability. This is not a soft charcoal, so it will last many times longer than ordinary charcoal blocks. It also has better heat retention, giving the user the desired reflective heat to solder faster and easier with better flow. Our premium blocks are wrapped in PVC, then individually boxed, eliminating the mess often associated with charcoal. Great for platinum. Measures 5½" x 2¾" x 1¼." | SOL-480.00 | $14.95 | |
 |
Adjustable Soldering Bowl- Stainless steel bowl holds workpiece when soldering, leaving both hands free. Mounted on solid base, bowl adjusts in any position for use on any job. bowl is 4" in diameter and 15/8" deep. Comes filled with Vigor Therma-Guard and can also be use with pumice stone. | 54.0720 | $25.50 | |
 |
CoolCup- So why
didn't anyone think of this before. This simple tool is a jeweler's dream for
soldering rings when resizing. Just fill the cup with cold water and submerge the
stone and mounting while soldering the shank. The stone is kept cool in the water.
Simple, effective. Soldering cup includes special sized negative locking
tweezers designed to sip on and off the post. This is a tool for virtually every
jeweler. |
SOL-700.00 |
$12.95 |
|
|
|
|
|
 |
|
|
The I. Shor Co. |
|
I. Shor Canada |
| Shor International Corporation | |
| Fine Tools, Equipment and
Innovative Products Since 1918 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190 |
|
|
e-mail: |
|
