The drawback to most micromotors is the low torque. No
more!- This new, brushless, ultra-high torque motor and
control system provide brute-strength power and smooth control
through the 1,000 to 50,000 rpm speed range and completely
eliminates carbon brush maintenance.
New, intelligent microprocessor controls provide fully variable
speed via console or foot control, protect the handpiece from damage
and display precise rotational speed. Automatic speed control
feature simplifies foot control speed operation.
Comes complete with brushless handpiece, 3/32"
collet, variable speed foot control and accessories. Made in USA.
X-50 Micromotor
Stock#
Price
X-50 Micromotor, 110V, complete
37800
$1,095
X-50 Micromotor, 220V, complete
37803
$1,185
X-50 Handpiece only
37805
$659
Foredom High
Torque, High Speed Micromotor
1050 High Torque (7.8 N cm),
Brushless, 50,000 rpm Micromotor
This new, brushless, ultra-high torque motor and control system
provide brute-strength power and smooth control through the 1,000 to
50,000 rpm speed range and completely eliminates carbon brush
maintenance. Runs on either 110V or 220V (50/60 cycle). New,
intelligent microprocessor controls provide fully variable speed via
console or foot control, protect the handpiece from damage and
display precise rotational speed. Automatic speed control
feature simplifies foot control speed operation. Includes auto
cruise, forward, reverse, dial or foot speed control. Digital
display for precise speed and torque settings. Ceramic bearings.
Comes complete with brushless handpiece, 3/32"
(2.35mm) collet, variable speed foot control and accessories.
Optional 1/8"
collet available ($30). 2 year warrantee. Made in USA. Stock #1050 Price $1,095
MicroTorque
Micromotor- With Quick
Release Handpiece
Ideal for model making, diamond setting, polishing and grinding.
Anything that you use a flex shaft for, the micromotor is better.
Speed control is precise. Precision work is easy to handle with the
flexible power cord. Excellent torque. The handpiece is cool
running, has a twist type quick release collet and runs at 0-35,000
RPM, forward and reverse. The control unit can be hand or foot pedal
operated and provides smooth constant power at all speeds. Available
with either simple on/off foot pedal (speed controlled with dial on
controller) or heavy duty variable speed foot pedal. All units are
supplied with a 3/32"
handpiece, 3 mm and
1/8"
handpieces can be purchased separately. Made in USA.
Quick Release Micromotors & Parts
Voltage
Stock#
Price
Micromotor complete with on/off foot pedal
110 / 220V
34.555
$429.95
Replacement volt control unit
110V
34.55601
$199.99
Replacement variable foot pedal
.
34.55602
$60.65
Replacement handpiece
.
34.5552
$209.45
New
Foredom Micro Motor- High Speed Rotary Handpiece
Variable Speed up to 45,000 RPM
#1070 Micro Motor Kit $395.00
This kit is ideal for high speed
applications up to 45,000 rpm, including light deburring of cast
pieces, bright cutting in jewelry making, and fine detailing in
woodcarving. Compared to flex shaft micro motors have much less
torque however, the higher speed results in a comparable rate of
material removal with a lighter touch. The simple coil cord
connection between the handpiece motor and control box is another
key advantage. Unlike the "drag" and general restriction in
maneuverability you have with a shaft and sheath, micro motors offer
much greater freedom of movement.
1070 Micro Motor Kit Includes:
Control-HP4-9l7, Handpiece with 3/32"
(2,35mm) Collet-MH-170, Variable Speed Foot Control-HP4-950,
Handpiece Cradle-HP4-933, Spare Pair of Motor Brushes, Spare
Fuse, Collet Changing Wrenches.
The compact Control has switches on
the front for 0n/0ff Power Forward or Reverse Rotation, and Manual
or Foot Speed Control. Speed can be adjusted from low to full speed
using the dial on the box, or with the foot pedal. An Overload
Protector Light turns red and sounds a beeping alarm if the
motor stalls. The back of the control box has a convenient voltage
selector switch for operating with either 115 or 230 volt-no need to
specify 230 volt when ordering. The control converts AC current to
DC current required for the handpiece. The box also has receptacles
for the Variable Speed Foot Control and an Optional On/0ff Foot
Switch (see below).
Optional On/Off Foot Switch HP4-927
$25.00
This control is available separately and does
not come in the kit. It plugs into the back of the control box
and allows you to turn the motor on and off without changing the
speed set by the dial.
Bur changes are quick and easy with a
simple twist of the front section of the Handpiece. A Cradle is also
supplied for the handpiece when not in use. A selection of collet
adapters is available for simplifying changes between accessories
with different shank size.
MH-170 High Speed Rotary Handpiece
It has a slender contoured grip
for precise and very high speed work and quick release rotary
type chuck. Use with accessories rated for at least 45,000 RPM.
Fan cooled, brush type continuous duty motor runs cool and
vibration-free and permanently lubricated, shielded ball
bearings require no lubrication. This handpiece can also be used
with the FM3545 control. Comes with 3/32"
(2.35mm) collet that is easy to install and change with supplied
collet changing wrench. Optional 1/8"
and 3mm collets are available ($26 ea.). 6.2" overall length,
5/8" grip
diameter, 1" motor diameter, 7 .3 oz/208 gr., DC30V/1.2A. CE
marked.
.
MH-O11 Micromotor Reciprocating Handpiece
$600.00
MH-011 has a slender, contoured grip and
impact adjustment ring for precise hammering work. Operates
from G-5,000 strokes per minute. 6½" overall length .
9/16" grip diameter, 1" motor
diameter. 13 oz/369 gr. 1.5 amps (115V) .75 amps (230V). CE
marked.
Reciprocating
Foredom Micromotor for Stone
Setting and Engraving-
Stock# 1080 Micromotor Kit $795.00
The 1011 Micromotor is ideal for stone
setting applications, including channel setting and engraving
techniques requiring reciprocating action.
The force of the impact of this
reciprocating handpiece can be adjusted from light to full by
turning the metal ring while the motor is off or running. The
speed of the hammer action can also be varied from 0- 5,000
strokes per minute with the manual dial on the control box. or
the optional foot speed control.
1011 Stone Setting/Engraving
Micro Motor Kit includes the MH-011
Hammer Handpiece. Stock#
1080 Micromotor Stone Setting Kit $795.00
FM3545 Control and the
H8-214 Graver Holder and other accessories sold
separately and shown below. The MH-011 Hammer Handpiece
comes with the 1011 kit.
Graver Holder Turns
Reciprocating
Micromotor into Power Engraver-
Graver Holder H8-214 screws
into the front end of the MH-01 1 Handpiece converting it into
a power engraving tool. Comes with 5/64"
allen key. (Graver not included.) Uses standard hand
gravers and liners.
H8-214 Graver Holder $19.00
Graver Holder only for use with
MH-011 Hammer Handpiece
MH-O11 Micromotor Reciprocating Handpiece
$600.00
MH-011 has a slender, contoured grip and
impact adjustment ring for precise hammering work. Operates
from G-5,000 strokes per minute. 6½" overall length .
9/16" grip diameter, 1" motor diameter. 13 oz/369 gr.
1.5 amps (115V) .75 amps (230V). CE marked.
The MH-011 Hammer Handpiece comes with the 1011 kit.
FC-2000 Foot Control $50.00
Solid state control in heavy duty plastic
housing. Varies handpiece speed from off to full speed while
control selection switch is in FOOT position only.
Other Accessories- These
accessories are included in 1011 Kit and are also
available separately as listed below:
Anvil Points with Threaded Shanks #
10177K $4.00.
Adapter for threaded Anvil Point # H8-32 $29.50.
Adapter for non-threaded Shank Accessories # H8-35
$29.50.
Graver Holder with Allen Key #H8-214 $19.00
1-5mm Open End Wrench #H8-38 $2.25.
AT-1 Handpiece Tray $2.95.
Spare Motor Brushes # HPB-3514 $19.50.
Back
to 
Motors
