About Shor  New

On Sale

To Place an Order

  Contents & Search Page

Mandrels for Flex Shaft
Back to:      wpe7.jpg (1597 bytes) Flex Shaft Gateway         wpe2.jpg (1354 bytes)Polishing Supplies Gateway 

3/32" Shank Mandrels
Quantity Stock# Price
General Mandrel- Used to adapt most accessories having a ⅛" shank. Dozen 43.140 $28.70
Wheel Mandrel, Steel- Use with wheels having 1/16" holes. No washer Dozen 43.130 $7.55
Wheel Mandrel, Nickel Plated Steel- Use with wheels having 1/16" holes. Washer Dozen 43.132 $8.15
Wheel Mandrel, Stainless Steel- Use with wheels having 1/16" holes. Washer Dozen 43.134 $14.99
Mandrel with Reinforced Shoulder Dozen 43.128 $9.25
Threaded Mandrel, Stainless Steel- With brass collar. Used with rubber point Dozen 43.126 $8.85
Threaded Mandrel- Popular for use with Cratex rubberized abrasives. Dozen 43.124 $7.55
Thread Mandrel, Tapered Short- With 3/16" screw length Dozen 43.120 $5.80
Thread Mandrel, Tapered Long- With ⅜" screw length Dozen 43.122 $5.80

 

⅛" Shank Mandrels
Quantity Stock# Price
Mandrel for Grinding Wheels, with 1/16" Holes- Made for wheels that are 1" in diameter, ¼" thick and have a hole size of 1/16". Dozen 43.158 $9.25
Mandrel for Grinding Wheels, with " Holes- Made for wheels that are 1" in diameter,¼" thick and have a hole size of ". Dozen 43.162 $12.60
Mandrel for Grinding Wheels with " Holes- Ideal for use with Cratex wheels Dozen 43.160 $12.60
Mandrel for Grinding Wheels, with ¼" Holes Dozen 43.164 $18.50
Mandrel with Reinforced Screw- One of our most popular general mandrels Dozen 43.156 $8.15
Threaded Mandrel- Popular for use with Cratex abrasives Dozen 43.154 $7.55
Tapered Threaded Mandrel, 3/16" Screw Length- Use with rubber points Dozen 43.150 $5.80
Tapered Threaded Mandrel, 3/8" Screw Length- Use with rubber points Dozen 43.152 $5.80

 

¼" Shank Mandrels Quantity Stock# Price
Threaded Mandrel- For use with rubber cones Each 43.166 $3.45
Mandrel for Grinding Wheels- Will fit wheels with ¼" hole size, up to 3" in diameter and ½" thick. Each 43.168 $5.80

 

Emery Mandrels Quantity Stock# Price
Split Mandrel- Made for use with emery paper.  2½" long with  3/32" shank to fit in handpieces. Straight Dozen 11.308 $13.75
Tapered Dozen 11.309 $13.75
Wood Arbor- Coat with adhesive and roll in abrasive to form 7" polish stick. Has �" arbor hole for tapered spindle mounting. Made from birch.  Also used for holding rings when polishing. Dozen 11.266 $18.85
Split Wood Mandrel- Slot hold emery paper so it can be wound around mandrel to desired thickness and secured with rubber band. Dozen 11.306 $19.05
Snap on Mandrel- High quality steel with  3/32 " shank.  For use with snap-on sanding disks. Each 10.740 $2.25

 

Abrasive Band Mandrels-     See also:  Abrasive Bands
Band Diameter 3/32" Shank 1/8" Shank Price
¼" 6.4 mm 11.200 11.201 $2.25
⅜" 9.5 mm 11.204 11.205 $2.25
½" 12.7 mm 11.208 11.209 $2.25
¾" 19.1 mm . 11.211 $2.25

 

Cartridge Roll Mandrels     See also:  Cartridge & Trizact Rolls
Shank Diameter Use with Rolls Stock# Price
⅛" 1 " long 11.01280 $2.00
⅛" 1½" long 11.01281 $2.00
3/32" 1" long 11.01282 $2.80
3/32" 1½" long 11.01283 $2.80

 

About Shor  New

On Sale

To Place an Order

  Contents & Search Page

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net