#30 Handpieces

Foredom#44T Handpiece

Excellent general purpose handpiece.  Similar to the #30 handpieces but with collets instead of Jacobs chuck..  Collet-type chuck handpiece accommodates accessories with shank sizes up to ¼" in diameter. Comes with three collets- ³/32" (2.35mm),¹/8" (3.18mm) and ¼" (6.4mm), and pin and chuck wrench. Other fractional and metric collets are available separately and in Collet Set 440. Can also be used in Foredom's handpiece holder  and drill presses. 5³/8" long,1" diameter (center) 3¼" diameter (taper), wt. 5.85 oz., ship wt. 7.5 oz.     Stock # Foredom44T   Price 56.00

Foredom #25 Heavy Duty Handpieces

TXH Handpieces- These handpieces have "square drives" with positive sheath locking mechanisms (locking rings that must be used exclusively with either Series TXH motors shown above or with the discontinued Series H motors). The #25 & 25C handpieces are not members of the Foredom system of interchangeable handpieces. The heavy duty #25C has permanently lubricated and shielded ball bearings for cool running continuous use. Precision collets from ¹/16" to ¹/4" and metric sizes are available. 1¹\32" diameter, 6¹/8" long. The #25 has permanently lubricated, shielded ball bearings and geared 3-iaw #0 Jacobson chuck with 0-⁵/8" (4mm) capacity. Includes chuck key in handle

The #25C comes with a #0 Jacobs chuck with 0-⁵/32" (4 mm) capacity., it will accept larger bits.   

The #25 is a collet version of the 25C and comes with ¹/8" and ¼" collets. 

Foredom#35 High Speed Handpieces

Grobet Hammer Handpieces

Foredom Hammer Handpieces-

With ¹/32" stroke and adjustable impact. An excellent hammer that has been a standard in the jewelry industry for decades.  Cannot be used with ¼ HP motor

Badeco Swiss Hammer Handpieces

Introduced to the jewelry industry by Shor, in the 1960's, the tool is most often used to make textures like "laser finish" and "bark finish" on jewelry, and to remove investment.  Also used in other fields, such archaeology (for removing stone around fossils) and sculpture (excellent for stone carving).  The unique method that the Airscribe uses to secure its replaceable stylus (cutting tool), insures that its reciprocating action (back & forth action) always hits in a random pattern, giving a very nature look to the result.

This lightweight, air driven tool works on metal, stone, glass, plastic and wood.  Operates economically on less than 1 cfm.  Compressor not included.  Comes with stylus, 8" reinforced hose and air filter.

Pneumatic Hammer with Diamond Tips-

Creates a hammered, textured finish on gold and silver.  Unit is lightweight and easy-to-handle.  Adjustable stroke control conveniently located on the handpiece.  Use handpiece at 90° angle to your work for best results and longest tip life.  Top quality construction with knurled handle.  Includes two diamond tips to provide different textures. Made in Italy.

Engraving Handpiece with Duplex