Gravers:   Sharpeners, Turning Gravers, Electric Gravers
Back to Engraving Gateway Page          Sharpening & Truing Stones              Also see:  Scribers

Turning Graver Sets
    Stock# Price
Set of 10 with Handles- For turning or pivoting items on small lathes. Set of ten different shapes made of tools steel with finished ground point 36.800 $79.99
Set of 6- For turning or pivoting items on small lathes. Set of six graduated sizes made of tools steel with finished ground points.  No handles. 36.804 $54.95

 

Burgess Vibro-Graver- This rugged industrial quality engraving tools makes permanent markings on the hardest steel, glass, plastic, stone, wood, or almost any hard surface. Used extensively by jewelers to make background effects on jewelry. Features a durable, tungsten carbide engraving tip, positive on/off switch and spark free motor that vibrates at 7200 strokes per minute. The calibrated adjustment dial changes length of stroke and depth of mark. A diamond tip is available as an accessory.
110 Volt Model Stock #36.860 $65.65
220 Volt Model Stock #36.860X $665.65
Replacement tungsten carbide tip Stock #36.862 $6.00
Diamond tip Stock #36.863 $27.60

 

Graver Sharpeners
Graver Sharpener- 

Graver is placed in either of two angled openings and rolled over flat oilstone to sharpen.

Stock#  36.884   $8.15
Crocker Pattern Graver Sharpener- 

Graver can be set to any angle by setting index. Hold graver edge in position while honing on oilstone.

Stock#  36.880   $48.40
Graver Sharpener- 

Special feature of this sharpener is the elongated shields that hold the graver in an immovable position during the sharpening action. Gravers can be sharpened at any angle. Screw on top locks graver and also serves as a finger rest.

Stock#  64.2462    $113.50

 

GRS Power Hone and Accessories-   The GRS Diamond Power Hone grinds tools and gravers quickly, without heat.   You get an advanced tool edge that enhances finished work.  The Power Hone allows for cleaner scrolls, brighter cuts, more precise beads, finer shading and better details.  The diamond wheel sharpens both steel and carbide tools and will make them last longer too.  Power Hone does not come standard with sharpening fixture shown in the picture below.  Reversible.
wpe4.jpg (7672 bytes) Item Description Stock# Price
Power Hone  (110v) w/600 grit wheel & adaptor G01-525B $379.00
Power Hone (220v) w/600 grit wheel & adaptor G01-543B $379.00
260 Grit,  5"  Diamond Wheel Coarse G02-138 $97.00
600 Grit,  5"  Diamond Wheel Medium G02-055 $89.00
1200 Grit,  5"  Diamond Wheel Fine G02-139 $89.00
Ceramic Lapping Wheel- For mirror finish 

 Requires diamond spray

 G02-415 $99.70
Diamond Spray ¼ Micron

For use with Lapping Wheel

 G02-752 $23.90
Diamond Spray ½ Micron

For use with Lapping Wheel

 G02-753 $23.90
Diamond Spray 1 Micron

For use with Lapping Wheel

 G02-754 $23.90
Diamond Spray 3 Micron

For use with Lapping Wheel

 G02-755 $23.90
Graver Sharpening Fixture Shown in picture left G03-100 $92.00
Graver Sharpening Fixture Dual Angle Calibration G03-570 $198.00
wpe5.jpg (2588 bytes) Quick Wheel Change Adapter-

Change wheels in 2 seconds.   Replaces the standard wheel knob.  To change wheels, you just lift them on and off...even when it's running.
                          Stock# G01-838     $49.00

 

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net