GRS Engraving Machines
Back to wpe1.jpg (1538 bytes)Flex Shaft Gateway               Back to   Engraving Gateway
Back to
Bench Tools Gateway           Back to Silversmithing & Chasing Gateway
For:  
GRS Training Video

GRS products are special order only and are not returnable

Gravermeister
You only need electricity...the compressor is built-in.  Gravermeister can transform your creative dreams and ambition into beautiful things you make with your own hands.

wpe15.jpg (6690 bytes) Technically, Gravermeister is an air tool that makes its own special air pulses.  These pulses move a hammer piston back and forth inside the handpiece, creating impact power.  A foot pedal lets you vary the power instantly as you work.   The impact rate is adjustable from 1600 to 2400 impacts per minute.

With Gravermeister, you can engrave deeply in steel and delicately in gold, carve wood effortlessly, set large and small stones with confidence, texture metal quickly, sculpt stone precisely and more.  Continuously improved, the latest Gravermeister cuts smoother, is completely oil-free and features advanced Quick Change handpieces.    Shipping weight 44 lbs.

Gravermeister Less Handpiece-   see below for handpieces Stock# G01-842 $1,279.00
Quick Disconnect Kit- Saves time by letting you switch from one handpiece to another in seconds.  Includes main body and two handpiece connectors. Saves time by letting you switch from one handpiece to another in seconds.  Includes main body and two handpiece connectors. Stock# G04-615 $26.95

 

GraverMach
The NEW! Ultimate Power Engraving System

Designed around the engraver and stonesetter’s need for power, finesse and control, the GraverMach provides it all in a compact package. The front mounted precision regulator is easy to adjust and use, the combination filter and water trap can be mounted on the machine or remotely for easy access. The dual voltage capability means you can use this machine anywhere in the world just by changing the IEC C13 industry standard power cord. The transformer is rated at 100 - 240 Volts, 50/60 Hz. and carries UL, GS, CE, and LPS certifications. From the first time you power up the GraverMach you will be amazed with its smooth, quiet performance. New porting technology gives your handpiece crisp impact from the low end to the high end. Stroke speed is adjustable from 400 to 8000 strokes per minute, the new front mounted bias valve setting allows the user to tailor the foot throttle feel. The power and air hookups are in the rear of the console and are mounted high to clear the bench top ledge found on many engraving and jewelry work surfaces. The handpiece hookups are now made with quick coupling fittings allowing the GraverMach to work with all your existing GraverMax handpieces.

110v    #G04-960        $1,095
220v   #G04-970         $1,095

GraverMax SC
New Look and Improved Performance

The GraverMax tradition continues with this all new design. Much like its new counterpart, the GraverMax SC has a front mounted standard regulator, adjustable stroke speed and quick disconnect handpiece fittings. The dual voltage capabilities allow the user world wide access to almost all single phase AC power sources. The engraver and stone setter will also find the compact size is easy to set up on restricted space workbenches, all at a price that makes the GraverMax SC affordable.

110v/220v #G04-980 GraverMax SC     $895

 

GraverMax, GraverMach &  Gravermeister Handpieces
GraverMax, GraverMate & Gravermeister Handpieces GraverMax
GraverMate
Gravermeister Price
wpe3.jpg (2053 bytes)

Bulino Hammer Handpiece-  Smallest, finest handpiece.   Unique side hose connection.  Perfect for small stone setting, fine engraving.   Set screw check hold square tools .08"-.10" (1.9-2.5 mm) and round tools .08"-.12" (2.2-3.0 mm) diameter. 2.8" long.

G04-563 G04-564 $169.00
wpe5.jpg (2908 bytes)

Hammer Handpiece w/Threaded Chuck-  Wide power range.   Great for stone setting, hammering, medium to deep engraving.  Stainless steel construction.  Set screw chuck holds square tools up to .10" (2.5 mm), round tools up to .13" (3.3 mm) diameter.  4.5" long.  Threaded tips only.   Includes 1 tip.

G04-609 G04-611 $239.00

Threaded Tip for Hammer Handpiece

G11-079 G11-079 $16.60

Hammer Handpiece w/ Set Screw-  Same as hammer handpiece above except does not require threaded hammer tips .  For Gravermeister only!

G04-611 G04-612 $239.00
wpe8.jpg (2389 bytes)

Large Hammer Handpiece-  Very powerful.  Designed for heavy metal engraving, wood carving and other demanding jobs.  Two-jaw chuck holds tools .06"-.19" (1.6-4.8 mm) round or square.  Also holds standard gravers.   5.7" long.

G04-506 G04-509 $208.00
wpe9.jpg (2180 bytes)

Standard Hammer Handpiece-  Medium power.  General purpose for jewelers and engravers.  Two-jaw chuck holds tools .06"-.14" (1.6-3.6 mm) round or square.  Also hold standard gravers.  4.5" long

G04-508 . $188.00
pix not shown

Ultra-High Speed Rotary Handpiece-  up to 400,000 rpm.

G04-850 . $389.00

 

wpeB.jpg (3878 bytes)

Quick Change GraverMax, GraverMach & Gravermeister Handpieces

Gravers & tools are first mounted in interchangeable Quick Change "QC" holders.  These holder fit into any QC Impact Handpiece or QC Sharpening Fixture.  You can now switch tools in 3 seconds with a wrench.  Just pull the tool with attached QC Holder out of the handpiece and insert another.  QC Holders accept square tools up to .10", round tools up to .13" diameter and most gravers.

Handpiece

GraverMax
GraverMate
Gravermeister Price
wpeF.jpg (2307 bytes)

Quick Change Wide Handpiece-  Wide power range.  Perfect for stone setting, hammering, medium to deep engraving.  Stainless steel construction with quiet rear exhaust.   Includes 6 QC Holders.  4.2" long.

G04-710 G04-712 $249.00
wpe10.jpg (2343 bytes)

Quick Change Maximum Handpiece-  Most powerful impact handpiece available.  Great for wood carving, very heavy metal engraving or hammering.  Includes 6 QC Holders.  5" long.

G04-720 . $269.00
wpe13.jpg (3301 bytes)

Quick Change GP Handpiece-  General Purpose.  Ideal combination of medium power and fine control for most engraving and stone setting.  Comfortable rubber cover and ergonomic shape.  Small and very maneuverable.  Quiet rear-exit exhaust.  Includes 3 QC Holders. 2.8" long.

G04-901 G04-915 $249.00
wpe12.jpg (1292 bytes) Extra QC Holders- Package of 3 G04-804 G04-804 $14.90

 

System 3
Economical air impact tool for jewelry making, engraving and more.

wpeE.jpg (14221 bytes)

System 3 is the most affordable GRS air impact tool.  Its relatives, Gravermeister, GraverMax and GraverMate produce special air pulses to control their impact handpieces.  System 3 handpiece is a piston and port design which self-oscillates using normal compressed air.  So it's simpler and less expensive.

System 3 handpiece is comfortable, lightweight and delivers good impact power.  It lets you engrave metals, set stones, hammer, texture and carve wood or other materials.  You eliminate fatigue and get your work done faster because System 3 increases the power of your hands.  The handpiece stays cool in use and includes the time-saving GRS Quick Change tool system.

The foot control starts the impact and varies its force.  You can tune System 3 for fine to heavy work using the regulator to provide more or less air pressure.  This give you a wide range of impact power.

System 3 is used in factories to equip multiple work stations and by people in small ships or at home.  If your needs don't justify other GRS air tools, order System 3.  You'll be pleased with the wonderful things it helps you do with your hands.

wpe2.jpg (5880 bytes)

Specifications:  System 3 requires compressed air 1.2 cfm at 50 psi minimum.  Shipping weight 6 lbs.

System 3 Standard Package-  Includes handpiece, foot control, air filter/regulator, 3 quick change tool holders, 6 steel points and instructions.    Stock# G04-780          $459.00

System 3 Handpiece OnlyStock# G04-760     $349.95

 

GRS Power Hone and Accessories-   The GRS Diamond Power Hone grinds tools and gravers quickly, without heat.   You get an advanced tool edge that enhances finished work.  The Power Hone allows for cleaner scrolls, brighter cuts, more precise beads, finer shading and better details.  The diamond wheel sharpens both steel and carbide tools and will make them last longer too.  Power Hone does not come standard with sharpening fixture shown in the picture below.  Reversible.
wpe4.jpg (7672 bytes) Item Description Stock# Price
Power Hone  (110v) w/600 grit wheel & adaptor G01-525B $379.00
Power Hone (220v) w/600 grit wheel & adaptor G01-543B $379.00
260 Grit,  5"  Diamond Wheel Coarse G02-138 $97.00
600 Grit,  5"  Diamond Wheel Medium G02-055 $89.00
1200 Grit,  5"  Diamond Wheel Fine G02-139 $89.00
Ceramic Lapping Wheel- For mirror finish 

 Requires diamond spray

G02-415 $99.70
Diamond Spray ¼ Micron

For use with Lapping Wheel

G02-752 $23.90
Diamond Spray ½ Micron

For use with Lapping Wheel

G02-753 $23.90
Diamond Spray 1 Micron

For use with Lapping Wheel

G02-754 $23.90
Diamond Spray 3 Micron

For use with Lapping Wheel

G02-755 $23.90
Graver Sharpening Fixture Shown in picture left G03-100 $92.00
Graver Sharpening Fixture Dual Angle Calibration G03-570 $198.00
wpe5.jpg (2588 bytes) Quick Wheel Change Adapter-

Change wheels in 2 seconds.   Replaces the standard wheel knob.  To change wheels, you just lift them on and off...even when it's running.
                          Stock# G01-838     $49.00

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net