Grobet & Valtitan Swiss Barrette Files
All Files are double cut (cross cut) unless otherwise noted

Back to wpe7.jpg (1231 bytes) Files Gateway Page

Barrette Files- Tapered in width and thickness, coming to a point. Only flat side is cut, providing safe edge and top  
Cross Section Length Width Diameter Cut 00 Price Cut 0 Price Cut 1 Price Cut 2 Price Cut 4 Price
3" 23/64" 3/32" . . 31.021 $18.65 . . . . . .
4" ½" 5/32" 31.022 $18.10 31.023 $19.10 31.024 $19.55 31.025 $20.65 31.026 $24.15
6" 23/32" ¼" 31.027 $21.20 31.028 $22.50 31.029 $24.70 31.030 $25.25 31.031 $28.35
8" 7/8" 5/16" . . 31.032 $30.95 . . 31.033 $33.45 . .

 

Valtitan Barrette Files- For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known- Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces. Cut 0 has blunt end.  Cut 2 has pointed end.

 Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.
Length Length Width Cut 0 Price Cut 2 Price
6" 23/32" ¼" 30.201V $39.00 30.202V $42.15

 

Barrette Hot Die Files- Same as regular barrette files except with ground backs, widely used in making and repairing extrusion dies. 
Cross Section Length Width Diameter Cut 00 Price
3" 3/8" 3/32" 31.017 $22.50
4" ½" 1/8" 31.018 $27.95

 

Barrette Needle Files 
Knurled Handles

.
Plastic Handles
Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Length Cut 0 Price Cut 2 Price Cut 4 Price
10 cm. 31.450 $9.00 31.451 $11.60 31.452 $11.60 . . 10 cm. 30.450 $12.95 30.451 $12.95 . .
14 cm. 31.453 $12.90 31.454 $9.45 31.456 $9.65 . . 14 cm. 30.452 $11.00 30.454 $11.00 30.456 $11.35
16 cm. 31.459 $10.50 31.461 $10.50 31.463 $10.95 31.464 $14.45 16 cm. 30.459 $11.85 30.461 $11.85 30.463 $12.35
20 cm. 31.466 $12.85 31.468 $12.85 31.470 $14.40 31.471 $16.95 . . . . . . .

 

Valtitan Barrette Needle Files- For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known- Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces.  Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.

Length Diameter Cut 00 Price Cut 0 Price Cut 2 Price
16 cm 5/16" 30.100V $18.00 30.101V $18.00 30.102V $18.00

 

Economy Barrette Needle Files- Well made, yet economical , Swiss needle files, made of chrome alloy steel.  Cut portion is 3" long.

Length Medium Price per Dz. Fine Price per Dz.
14 cm. 33.880 $47.40 33.881 $53.20

 

Barrette Ground Back Needle Files- Same as regular barrette needle files except with ground backs, widely used in making and repairing extrusion dies. 

Cross Section Length Cut 0  Price
14 cm. 31.693 $27.95
16 cm 31.694 $23.90

 

Barrette Escapement Files- Also known as square handled needle files, these precision files have a length of cut of about 2".

Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Cut 8 Price
14 cm. 31.700 $15.70 31.701 $15.75 31.703 $15.75 31.704 $15.75 31.705 $20.95

 

Barrette Parallel Escapement Files- Also known as square handled needle files, these precision files have a length of cut of about 2".

Length Cut 2 Price Cut 4 Price Cut 6 Price
14 cm. 31.708 $15.75 31.709 $17.15 31.710 $20.00

 

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net