Swiss 3-Square Files
All Files are double cut (cross cut) unless otherwise noted

Back to wpe7.jpg (1231 bytes) Files Gateway Page

3 Square- Gradually tapered. Cut and usable to the point.
Cross Section Length Diameter Cut 00 Price Cut 0 Price Cut 1 Price Cut 2 Price Cut 4 Price
4" 9/32" 31.366 $15.90 31.367 $15.90 31.368 $16.30 31.369 $16.30 31.370 $17.25
6" 3/8" 31.371 $15.95 31.372 $15.95 31.373 $16.90 31.374 $16.90 31.375 $21.40
8" ½" 31.376 $21.95 31.377 $21.95 31.378 $23.55 31.379 $23.55 . .

 

3 Square Slim & Short- Gradually tapered. Cut and usable to the point. Same as 3-square except thinner, for working in small areas.
Length Width Cut 0 Price Cut 2 Price
6" 5/16" 31.381 $21.60 31.382 $23.90

 

Valtitan 3-Square Files- For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known- Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces. Cut 0 has blunt end.  Cut 2 has pointed end.

 Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.
Length Diameter Cut 0 Price Cut 2 Price
6" 3/8" 30.261V $21.15 30.262V $22.40
8" ½" 30.264V $27.90 30.265V $29.99

 

American Pattern 3-Square- The three square file is the file of choice by machinists, when filing angles more acute than 90 degrees, for cleaning out corners and filing taps and cutters.  This triangular file is taped to the point.  It can get into corners other files cannot. Swiss made.

Cross Section Length Diameter Bastard Cut (00) Price per Dz. 2nd Cut (0) Price per Dz. Smooth Cut (2) Price per Dz.
4" 5/16" 32.455S $93.99 32.45501S $111.99 32.45502S $119.99
6" 15/32" 32.456S $113.99 32.460S $124.99 32.464S $125.99
8" 5/8" 32.457S $121.99 32.461S $138.99 32.465S $146.99
10" ¾" 32.458S $152.99 32.462S $164.99 32.466S $174.99
12" 1" 32.359S $259.99 32.463S $269.99 . .

 

Die Sinkers' 3-Square- Overall length 5½". Length of cut 3½".
Cut 0 Price Cut 2 Price
31.440 $20.30 31.441 $20.30

 

American Pattern Taper Saw, Single Cut- The Taper Saw file is a triangular, single cut file designed for filing a variety of saws with 60 degree teeth.  Tapered toward a point, this file has cut edges for filing gullets between saw teeth.  Swiss made. Sold by dz only  

Regular Width

Slim Width
Extra Slim Width
Double Extra Slim Width
Length  Regular
Width		 Stock# Price Slim
Width		 Stock#  Price Extra Slim
Width		 Stock# Price Double-Extra
Slim Width		 Stock# Price
4" 5/16" 32.431S $43.99 7/32" 32.438S $44.99 3/16" 32.445S $48.99 . . .
5" 5/16" 32.432S $50.99 9/32" 32.439S $43.99 15/64" 32.446S $47.99 3/16" 32.450s $68.99
6" 15/32" 32.433S $57.99 11/32" 32.440S $50.99 9/32" 32.447S $49.99 7/32" 32.451s $63.99
7" 17/32" 32.434S $70.99 13/32" 32.441S $59.99 5/16" 32.448S $59.99 ¼" 32.452s $66.99
8" 19/32" 32.435S $89.99 15/32" 32.442S $70.99 13/32" 32.449S $70.99 5/16" 32.453s $76.99
10" 23/32" 32.436 $119.99 5/8" 32.443 $75.99 . . . . . .

 

Habilis 3-Square  Files- For the "in-between" jobs- bigger than a needle file but smaller than a standard file. Length of cut is 4" with an overall length of 8½".
Width Cut 00 Price Cut 1 Price
1/8" 33.828 $12.35 33.829 $12.35

 

3-Square Needle Files 
Knurled Handles

.
Plastic Handles
Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Length Cut 0 Price Cut 2 Price Cut 4 Price
10 cm. 31.630 $12.25 31.631 $12.25 . . . . 10 cm. 30.630 $13.60 30.631 $13.60 . .
14 cm. 31.633 $9.90 31.634 $9.90 31.636 $10.75 . . 14 cm. 30.633 $11.25 30.634 $11.25 30.636 $12.10
16 cm. 31.638 $10.54 31.640 $10.54 31.642 $11.60 31.643 $14.45 16 cm. 30.638 $11.85 30.640 $11.85 30.642 $12.95
20 cm. 31.645 $12.85 31.647 $13.25 31.649 $14.40 31.650 $16.95 . . . . . . .

 

Valtitan 3-Square Needle Files- For platinum, stainless steel, exotic plastics and other hard to file materials.  The hardest surface known- Rockwell hardness 72HRc.  Best performance on hard-to-file surfaces.  Little or no clogging, a simple knock is enough to remove the chips.  Highly resistant to corrosion.  Swiss.

Length Diameter Cut 0 Price Cut 2 Price
16 cm 5/16" 30.113V $11.80 30.114V $11.80

 

Single Cut 3 Square Needle Files- Single cut files, in addition to being much more economical than the standard double cut,  have an advantage that they do not clog as easily as double cut files.

Length Cut 4 (fine) Price
14 cm. 33.865 $5.05

 

Economy 3-Square Needle Files- Well made, yet economical , Swiss needle files, made of chrome alloy steel.  Cut portion is 3" long.

Length Medium Price per Dz. Fine Price per Dz.
14 cm. 33.900 $36.90 33.901 $38.99

 

3-Square Escapement Files- Also known as square handled needle files, these precision files have a length of cut of about 2".

Length Cut 0 Price Cut 2 Price Cut 4 Price Cut 6 Price Cut 8 Price
14 cm. 31.760 $15.55 31.761 $15.55 31.762 $15.55 31.763 $15.55 31.764 $18.25

 

3-Square Slim & Short Escapement- Also known as square handled needle files, these precision files have a length of cut of about 1¾".

Length Cut 2 Price Cut 4 Price Cut 6 Price
14 cm. 31.766 $15.55 31.767 $15.55 31.768 $15.55

 

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net