 |
 |
|
 |
||
 |
||
|
|
 |
|
|
|
|
|
||
|
||
|
|
|
|
 |
 |
|
|
|
 |
Lathes for Cutting, Diamond Finishing & Texturing Wedding Bands
Back to 
Faceting Gateway
 |
Precision Lathe-
For watchmakers, clockmakers and jewelers. A precision lathe at an
affordable price. Comes with a 3 jaw chuck, adjustable tool
tailstock and a fully adjustable tool holder/slide rest. Tailstock
is supplied with a dead center but can be easily fitted with a live
center. An 8 mm watchmaker collet holder for WW pattern collets is
available as well as precision collets and collet holder. The
tailstock and headstock can both hold any of the available chucks (3 jaw,
4 jaw etc.) or an 8 mm drill chuck. A 2 speed motor and 4 different
motor pulley ratios allow for 8 spindle speeds: 130, 200, 350, 560,
920, 1,500, 2,450, 2,450 and 4,000 RPM's. Multiple speeds plus high
stability make this lathe perfect for texturing, lathe
millgraining, wedding ring tube cutting and channel cutting
Most of these processes require the use of an SV-12
collet expander and collets.
). Comes mounted on a sturdy base.
Stock# LA41030 Price $795.00 |
||
 |
Benzinger Lathe, Model 3-D-
For diamond polishing the insides and edges of wedding rings. Polishes the
edges and chamfers the corners in one operation. Single lever for starting, stopping
and braking. High precision anti-friction bearings. Transversal slide with
ring size Vernier scale- simply set for the ring size. Spray mist cooling
device. Set of 37 collets on peg board. 3 diamond tools included. 5
speeds from 700 to 2,900 rpm. Motor
1/2 HP, 220V, 3 phase,
50/60 cycle |
||
 |
Benzinger Lathe,
Model KKsH- For diamond polishing the outsides of wedding rings.
For making D-shape rings from flat rings with optional radius turning
accessory. Single lever for starting, stopping and braking. High precision
bearings optionally available. Spray mist cooling device. Set of 25 collets on peg
board. 2 diamond tools included. 5 speeds from 700 to 2,900 rpm.
Optional Radius Turning Slide Rest makes D-shape rings from flat rings. Optional
devices for HiLo rings, square rings and tapered rings. Motor: 1/2 HP, 220V, 3 phase, 50/60 cycle Dimensions: 40" wide x 50" high x 22" deep Net Weight: 450 lbs. Ship Weight: 500 lbs. Benzinger Radius Turning Slide Rest for Model KKsH- For doming flat rings. |
||
 |
|||
|
Benzinger Lathe, Model R3-D-
For doming and diamond polishing the insides and edges of wedding rings.
Finishes the insides of wedding rings with a domed surface. Chamfers the corners as
it diamond polishes the edges. High precision anti-friction bearings. Transversal slide with ring size Vernier scale- simply set for the ring size. Spray mist cooling device. Set of 37 collets on peg board. 3 diamond tools included. 5 speeds from 700 to 2,900 rpm. Motor 1/2 HP, 220V, 3
phase, 50/60 cycle |
||
 |
Benzinger Tubing Cut-Off Lathe-
For making wedding ring blanks from tubing. Rapid action cutting of tubing.
High precision quick-change width gage. Automatic mist cooling. Cuts
tubing up to 25 mm o.d. Motor
1 HP, 220V, 3 phase,
50/60 cycle |
 |
Flat Collet Arbors, Moyas- 152 mm long. Shaft 8 mm diameter. | $195.00 |
 |
Expanding Mandrels for Moyas Lathe- Length 132 mm. Outside thread diameter 12 mm. | $195.00 |
|
Toolholders for Diamond Lathes- | $250.00 |
|
Benzinger Locking Assembly for Eccentric Turning Device | $25.00 |
|
Benzinger Draw Screws for Eccentric Turning Device | $10.00 |
|
Benzinger Cutoff Tools | $5.00 |
|
Benzinger Mercury Switch | $75.00 |
|
|
|
|
 |
|
|
The I. Shor Co. |
|
I. Shor Canada |
| Shor International Corporation | |
| Fine Tools, Equipment and
Innovative Products Since 1918 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190 |
|
|
e-mail: |
|
