Faceting Collets & Blanks- Used for holding rings, bracelets and flat stock on diamond faceting machines and lathes. For shaping wedding rings, decorating rings, bright cutting rings, texturing rings and channel cutting rings.

Faceting Collets and Blanks

Back to Faceting Gateway

Ring Collet Sets

Standard Brass Ring Collet Sets, Inside Holding- For lathe & faceting machine.

Set of 23, sizes 4-15 by ½ size increments, Standard Collets- $495
Set of 23, sizes 4-15 by ½ size increments, Std. Collets with Stand- $650

Set of 23, sizes 4-15 by ½ size increments, Tapered Collets- $495
Set of 23, sizes 4-15 by ½ size increments, Tapered Collets with Stand- $650

Set of 23, sizes 4-15 by ½ size increments, High/Low Collets- $595
Set of 23, sizes 4-15 by ½ size increments, High/Low Collets with Stand- $750

Brass Lathe Collet Set, Outside Holding- For lathe only.

37 pieces $999 with stand

wpe1C.jpg (1946 bytes)

Standard Brass Ring Collets- $39 each

Hi-Low Brass Ring Collets- Hi-Low ring collets are quite different from standard collets.

When used on a lathe (with an SV-12 ring collet expander), they can be used to shape an ordinary ring in a Hi-Low ring (see picture to left).

When used with a ring drilling quadrant, a faceting machine or a lathe, they can be used to channel cut a Hi-Low ring.

When used with a faceting machine, they can be used to bright cut a Hi-Low ring.

$49 each

wpe1D.jpg (4007 bytes)

Ring & Disk Blanks- Domed & flat. Used to experiment with styles without the cost of cutting gold. Also excellent for learning.

Price $9.95 per dozen of a style.

wpe27.jpg (3795 bytes)

Bracelet Blanks- $3.95 each.

Moyas Lathe Brass Collets, Flat Work, Type A-

Moyas Lathe Brass Collets, Flat Work, Type B-

Drawstems and Cone for use with Watchcase Collets- This item functions in a manner similar to a drawbar combined with an SV-12 collet expander. When drawn back, it causes the watch case collet to expand. Photos at left show drawstem and cone side by side with a collet and also inserted into the collet. Collet not included in price. See collets below.

Moyas Lathe Brass Collets, Watchcase & Flat Work, Type A-

Moyas Lathe Brass Collets, Watchcase & Flat Work, Type B-

Moyas Lathe Brass Collets, Watchcase & Flat Work, Type C-

Moyas Lathe Brass Collets, Watchcase & Flat Work, Type D-

Benzinger Lathe Steel Collets, Watchcase & Flat Work, Type A-

Benzinger Lathe Steel Collets, Watchcase & Flat Work, Type B-

Drawbar for M3 Disk Holding Collet-

Brass Bangle Collets-

Nylon Bangle Collets-

Nylon Bangle Collets Style B-

Steel Bangle Collets Style A-

Steel Bangle Collets Style B-

Steel Collet Collars, TD-

The I. Shor Co.

I. Shor Canada

Shor International Corporation
*Fine Tools, Equipment and Innovative Products Since 1918* 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190
e-mail:	shorinternational@attglobal.net