Contact: Fax: (973) 520-8779
 

About Shor  New On Sale To Place an Order Contents & Search Search

Welcome, Guest! View My Cart or Checkout.
 

Diamond Drill Bits
Back to  wpe2.jpg (1283 bytes) Drilling Gateway Page        Also see: Diamond Mounted Points     Bead & Pearl Drill Vise

Important:  When using diamond coated drills, points, wheels etc:

  • Always completely submerge, both drill bit cutting surface and object being drilled, in water. 

  • Use light pressure

  • Between 5,000-20,000 rpm

  • Lift often

  • Best results when used in a drill press

  • Use bur lubricant or beeswax on cutting surface

  • If diamonds are being worn off too quickly or bit becomes hot and discolors, you are not using the above guidelines.

Because of the nature of the diamond coating process, drill bit diameters may vary by as much as plus or minus 0.5 mm

Diamond Coated Twist Drills-  We have added a medium-fine coating to the tips of high-speed twist drills to drill stone, ceramic, glass and other hard non-metallic materials.   The drills are made of superior high-grade steel.  Price:  $4.95 each  or complete set of twelve for $46.95
Complete Set of 12 Stock # DIB-227.00
Add to Cart
Price $46.95
Inches .0350 .0390 .0465 .0550 .0595 .0635 .0670 .0700 .0785 .0820 .0982 .1065
MM 0.889 0.990 1.181 1.397 1.512 1.613 1.702 1.778 1.994 2.083 2.489 2.705
Stock# DIB-227.65
Add to Cart
DIB-227.61
Add to Cart
DIB-227.56
Add to Cart
DIB-227.54
Add to Cart
DIB-227.53
Add to Cart
DIB-227.52
Add to Cart
DIB-227.51
Add to Cart
DIB-227.50
Add to Cart
DIB-227.47
Add to Cart
DIB-227.45
Add to Cart
DIB-227.40
Add to Cart
DIB-227.36
Add to Cart

 

Diamond Coated Twist Drill Burs-  Our 3/32" shank Swiss made twist drill burs with electroplated diamond particles are the ultimate for drilling stones, pearls, glass or ceramics.  Use with standard handpieces and a small amount of water as lubricant.  All drills are medium-fine grit. Price $4.80 each or complete set including of of each for $26.60
Complete Set of 6 Stock # DIB-210.00
Add to Cart
Price $26.60
MM 1.00 1.30 1.40 1.60 1.80 2.10
Stock # DIB-210.70
Add to Cart
DIB-210.90
Add to Cart
DIB-211.00
Add to Cart
DIB-211.20
Add to Cart
DIB-211.40
Add to Cart
DIB-211.60
Add to Cart

 

Diamond Coated Core Drills-  You can use core drills to cut holes in ceramics, tile and glass without chipping or cracking.  Our diamond-coated core drills have a 3 mm 1/8" shank, medium-fine grit and are made of stainless steel on which the diamond particles have been electroplated. The 6 piece set is packaged in a reusable pouch. The set of 6 includes sizes 1.5, 2.0, 2.5, 3.0, 5.0 and 6.5 mm.
Set of 6 Stock # DIB-500.00
Add to Cart
Price $38.95
MM 1.5 2.00 2.50 3.00 4.00 5.00 6.50 9.50 10.00
Add to Cart
11.00
Add to Cart
Stock# DIB-501.50
Add to Cart
DIB-502.00
Add to Cart
DIB-502.50
Add to Cart
DIB-503.00
Add to Cart
DIB-504.00
Add to Cart
DIB-505.00
Add to Cart
DIB-506.50
Add to Cart
DIB-509.50
Add to Cart
DIB-510.00
Add to Cart
DIB-511.00
Add to Cart
Price $5.42 $5.42 $5.42 $5.42 $7.84 $8.47 $10.82 $14.86 $15.90 $18.27

 

Diamond Coated "Stick" Drills-  Perfect for drilling ceramic and stones, drills have diamond particles electroplated onto their hardened surface.  Ideally used at speeds between 5,000 and 20,000 rpm, our drills provide exceptionally long life.   All drills are medium-fine grit.  Total length about 25 mm.  Length of coating about 1.5 mm.
Price $2.75 each
     or     complete set of 6 (1 of each size)  for $16.50 .
Complete Set of 6 Stock # DIB-550.00
Add to Cart
Price $16.50
MM 0.75 1.00 1.25 1.50 2.00 2.50
Stock # DIB-550.75
Add to Cart
DIB-551.00
Add to Cart
DIB-551.25
Add to Cart
DIB-551.50
Add to Cart
DIB-552.00
Add to Cart
DIB-552.50
Add to Cart
 
 

About Shor | New | On Sale | Contents & Search Page
© 2010. Shor International Corporation. All rights reserved.