Jeweler's Wood Hub Wire Brushes
Back to
Polishing Supplies Gateway
Brushes Gateway
Wire
Texturing Wheels
Texturing
Gateway
Wire brushes are for cleaning and also for producing a satin finish on jewelry. As with all textures, the finish will vary depending upon the speed of the motor, the diameter of the brush, the length of the bristles and the stiffness of the bristles (stiffness differs with the nature of the strands--steel or brass, crimped or straight, thick or thin).
| Wheel | Stock# | Price | |
|---|---|---|---|
![]() |
Heavy Duty Crimped Steel Wire Brush- For removing rust, scale, grease etc from metal surfaces. Steel hub with flanges provides extra strength. 6" diameter, .005" wire, with ½" arbor hole. | 16.470 | $29.30 |
| Lightly Crimped Straight Steel Satin Finish Brush- Produces a frosted finish when run at high speeds. One row of .0055" steel wire bristles mounted on wood hub with reinforced metal center. | 16.472 | $13.00 | |
| Steel Bur and File Cleaning Brush- Two rows of lightly crimped .003" steel wire removes particles of metal clogged between teeth of files and burs. Can also be used for stripping insulation from small electrical wires. Diameter is 1.65". | 16.475 | $7.50 |
Scratch Wheels
For cleaning and surface finishing on metal. Wire bristles are
mounted on seasoned hardwood hubs with metal reinforced centers to fit tapered spindles.
All brushes have a ¼" arbor hole
|
|
Straight Brass Wire Scratch Brushes- For cleaning and surface finishing. Straight wire produces a coarser finish than crimped. Strands are .003". |
||||||||
| Rows | 1 | 2 | 2 | 3 | 3 | 4 | 4 | 4 | |
|---|---|---|---|---|---|---|---|---|---|
| Diameter | 3" | 3" | 4" | 3" | 4" | 3" | 4" | 6" | |
| Stock# | 16.425 | 16.426 | 16.427 | 16.429 | 16.430 | 16.431 | 16.432 | 16.433 | |
| Price | $5.70 | $9.99 | $13.00 | $16.40 | $16.50 | $18.50 | $20.50 | $32.00 | |
![]() |
Crimped Brass Wire Scratch Brushes- For surface finishing. Produces a softer, satin or matte finish. Strands are .004". |
|||||||
| Rows | 2 | 2 | 3 | 3 | 4 | 4 | 4 | |
|---|---|---|---|---|---|---|---|---|
| Diameter | 3" | 4" | 3" | 4" | 3" | 4" | 6" | |
| Stock# | 16.440 | 16.441 | 16.443 | 16.444 | 16.445 | 16.446 | 16.447 | |
| Price | $6.05 | $8.20 | $6.60 | $10.05 | $8.85 | $10.55 | $17.60 | |
![]() |
Lightly Crimped Steel Wire Scratch Brushes- For cleaning, deburring and surface finishing on white metals. Produces pronounced surface effects. Strands are .003". |
|||||||||
| Rows | 1 | 2 | 2 | 2 | 3 | 3 | 4 | 4 |
4 |
|
|---|---|---|---|---|---|---|---|---|---|---|
| Diameter | 3" | 3" | 4" | 6" | 3" | 4" | 3" | 4" | 6" | |
| Stock# | 16.455 | 16.456 | 16.457 | 16.458 | 16.459 | 16.460 | 16.461 | 16.462 | 16.463 | |
| Price | $5.65 | $6.99 | $9.20 | $12.70 | $8.05 | $13.50 | $8.99 | $12.30 | $18.25 | |
|
The I. Shor Co. |
I. Shor Canada |
| Shor International Corporation | |
| Fine Tools, Equipment and
Innovative Products Since 1918 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190 |
|
|
e-mail: |
|