 |
 |
|
 |
||
 |
||
|
|
 |
|
|
|
|
|
||
|
||
|
|
|
|
 |
 |
|
|
|
 |
Jeweler's Benches Pins
Back to 
Bench Tools Gateway
See also: 
Ring
Clamps
| Accessory | Size/Style |
Stock# | Price | ||
 |
Bench Pins for Rings- Screw to top of bench. Shaped especially to hold rings. Has slot as channel for saw blade.. | 5½" x ½" x 3/8" | 13.303 | $2.80 | |
 |
Bench Pins for Ring Clamp- With hole to fit hand ring clamp. | 6¼" x 2½" | 13.0202 | $4.45 | |
 |
Wood Bench Pins- Fit into slot in work bench and are used as supports when filing, sawing, setting etc. | 5¼" x 2¼" | 13.300 | $2.80 | |
| 6¼" x 2½" | 13.301 | $2.90 | |||
| 7" x 2½" | 13.302 | $3.30 | |||
 |
Bench Pin in Metal Holder- Can easily be screwed to edge of work bench. Thumb screw locks wood bench pin in place. |
holder- 4" wide |
13.320 | $9.99 | |
 |
Combination Bench Pin and Anvil- For supporting pieces being flattened and laying out work. Wood bench pin measures Flat anvil is smoothly finished. Adjustable clamp enables you to use it on benches up to 2" thick. Anvil accepts bracelet mandrel (stock# 43.052). See also Mandrel & Anvil Set. | Combo bench pin & anvil | 2¼" x 6½" | 13.325 | $17.35 |
| Extra bench pins | 1¾" x 4". | 13.327 | $2.35 | ||
 |
V-Slot Board and Clamp- Used as support filing, sawing and drilling. Clamp fits any work surface up to 2" thick. Board measures | V-Board & Clamp | 7½" x 2½" | 13.361 | $8.40 |
| Extra board | 7½" x 2½" | 13.362 | $3.15 | ||
 |
Enameled Fiberboard Bench Plate- Has part catching groove on all four sides. Will not warp. | 9" x 16" | 13.0183 | $9.40 | |
|
|
|
|
 |
|
|
The I. Shor Co. |
|
I. Shor Canada |
| Shor International Corporation | |
| Fine Tools, Equipment and
Innovative Products Since 1918 20 Parkway West, Mt. Vernon, N.Y. 10552 Phone (914) 667-1100 Fax (914) 667-0190 |
|
|
e-mail: |
|
