Micro-Therm Torch-
This new torch, which works from a normal lighter refill, offers wax carvers
a source of heat, which tops out at 750° F. It is essentially hot
air and not an exposed flame.
If you want to eliminate flare or otherwise smooth out rough edges or
parting lines from wax castings, this small torch is perfect for you.
The torch feature a comfortable palm grip and trigger with locking
mechanism, as well as automatic shut-off. Made of high-impact
plastic, the Micro-Therm Torch is a must for any bench.
Stock# SOL-320.00
Price $36.95
Micro Flame Burner-
Self-Igniting Micro Flame Burner is a brand new approach to bench
burners. Fueled by butane, this burner give a pure hot flame without
smoke. The housing has a broad base, making it virtually
impossible to tip over. Reach the temperature you need faster with
this efficient unit.
Stock# LMP-424.00
Price $31.45
Alcohol Lamps- Use "denatured solvent" (wood alcohol) as
fuel. All lamps come with 1 wick. Additional wicks are sold
separately in packs of 12.
Wicks-
packs of 12
Wick Diameter
Stock#
Price
½"
14.292
$12.40
3/16"
14.293
$5.30
¼"
14.294
$5.30
Capacity
Dimensions
Wick Diameter
Stock#
Price
Glass Alcohol Lamp-Nickel
plated brass with adjustable screw
1½ ounces
2½" diameter x 3" high
3/16"
14.278
$11.99
3 ounces
3" diameter x 3" high
14.279
$12.40
Simplicity Burner-
Flame can be adjusted by raising or lower spot sleeve.
4 ounces
-
½"
14.285
$9.60
¼"
14.286
$7.99
Simplicity Adjustable Burner-
W/ screw adjustment for wick.
4 ounces
-
3/16"
14.287
$10.25
Metal Alcohol Lamps-
Polished chrome plated brass with screw adjustment for wick.
3 ounces
3" diameter x 3½" high
3/16"
14.288
$26.25
5 ounces
3½" diameter x 3½" high
3/16"
14.289
$29.55
Bunsen Burners-
All use natural gas. Stock # 14.260 will also accept
artificial gas.
Stock#
Price
Needle
Valve Bunsen Burner- Has needle valve gas control
adjustment to provide flame from very hot brush to needle with intense
heat. 3" base diameter with 4½" height. Uses ½" tubing. for
artificial or natural gas.
14.260
$45.60
Nickel Plated Micro
Bunsen Burners-With tapered,
serrated stems for use with 5/16"
ID tubing.11/16"
ignition collar stabilizes flame. With adjustable air intake and 3"
base diameter. For use with natural gas.
4"
14.267
$27.65
5"
14.266
$27.65
T Handle
Bunsen Burner- Has adjustable pilot flame with T
handle valve. An
11/16"
ignition collar stabilizes flame. Use with
5/16"
ID tubing. 3" at base. 6" high.
14.269
$45.60
22/3"
Bunsen Burner- Has 2" diameter black enamel base and
the height is only 22/3".
Uses ½" tubing. For use with natural gas.
14.271
$17.90
Micro Bunsen Burner-
Nickel plated with tapered, serrated stem for use with
5/16" ID tubing.
Lever in base adjusts air intake. 2" base diameter with 29/16"
height. For use with natural gas.
14.268
$22.50
Tripods-
Can be placed over Bunsen burner or alcohol lamp, or used with heavy mesh
screen # 14.330 , so that work can be heated from below while soldering or
enameling.
Stock#
Price
6.5" Tripod With Mesh Screen-
Can be placed over Bunsen burner or alcohol lamp, or used with heat frame
# 14.330 , so that work can be heated from below while soldering or enameling.
Mesh screen is 6.
14.312
$13.80
9" Tripod With Mesh Screen-
Can be placed over Bunsen burner or alcohol lamp, or used with heat frame
# 14.330 , so that work can be heated from below while soldering or enameling.
Mesh screen is 6"
14.315
$18.90
9" Tripod Only-
Can be placed over Bunsen burner or alcohol lamp, or used with heat frame
# 14.330 , so that work can be heated from below while soldering or enameling.
14.321
$13.80
Replacement Mesh Screen for
Tripod
14.325
$4.95
Heavy Mesh Screen-
Used on tripod, charcoal block or non-asbestos block. Work can be
heated from below while soldering or enameling. Size 6" x 6" square.
Stock# 14.330 Price $6.25
Back
to: 
Model
Making & Sprueing Gateway
Soldering
& Melting Gateway
